Hướng dẫn dùng aws samples python

This version of the AWS Code Sample Catalog has been replaced by the AWS Code Library, which contains new and updated code examples.

The examples listed on this page are code samples written in Python that demonstrate how to interact with AWS Lambda.

For more information, see the AWS SDK for Python [Boto3] Getting Started and the AWS Lambda Developer Guide.

• api_gateway_rest.py
• lambda_basics.py
• lambda_handler_basic.py
• lambda_handler_calculator.py
• lambda_handler_rest.py
• lambda_handler_scheduled.py
• scenario_getting_started_functions.py
• scheduled_lambda.py
• test

In this tutorial, you use the console to create a Lambda function and configure a trigger for Amazon Simple Storage Service [Amazon S3]. The trigger invokes your function every time that you add an object to your Amazon S3 bucket.

We recommend that you complete this console-based tutorial before you try the tutorial to create thumbnail images.

Prerequisites

To use Lambda and other AWS services, you need an AWS account. If you do not have an account, visit aws.amazon.com and choose Create an AWS Account. For instructions, see How do I create and activate a new AWS account?

This tutorial assumes that you have some knowledge of basic Lambda operations and the Lambda console. If you haven't already, follow the instructions in Create a Lambda function with the console to create your first Lambda function.

Create a bucket and upload a sample object

Create an Amazon S3 bucket and upload a test file to your new bucket. Your Lambda function retrieves information about this file when you test the function from the console.

To create an Amazon S3 bucket using the console

1. Open the Amazon S3 console.

2. Choose Create bucket.

3. Under General configuration, do the following:

   1. For Bucket name, enter a unique name.

   2. For AWS Region, choose a Region. Note that you must create your Lambda function in the same Region.

4. Choose Create bucket.

After creating the bucket, Amazon S3 opens the Buckets page, which displays a list of all buckets in your account in the current Region.

To upload a test object using the Amazon S3 console

1. On the Buckets page of the Amazon S3 console, choose the name of the bucket that you created.

2. On the Objects tab, choose Upload.

3. Drag a test file from your local machine to the Upload page.

4. Choose Upload.

Create the Lambda function

Use a function blueprint to create the Lambda function. A blueprint provides a sample function that demonstrates how to use Lambda with other AWS services. Also, a blueprint includes sample code and function configuration presets for a certain runtime. For this tutorial, you can choose the blueprint for the Node.js or Python runtime.

To create a Lambda function from a blueprint in the console

1. Open the Functions page of the Lambda console.

2. Choose Create function.

3. On the Create function page, choose Use a blueprint.

4. Under Blueprints, enter s3 in the search box.

5. In the search results, do one of the following:

   • For a Node.js function, choose s3-get-object.

   • For a Python function, choose s3-get-object-python.

6. Choose Configure.

7. Under Basic information, do the following:

   1. For Function name, enter my-s3-function.

   2. For Execution role, choose Create a new role from AWS policy templates.

   3. For Role name, enter my-s3-function-role.

8. Under S3 trigger, choose the S3 bucket that you created previously.

   When you configure an S3 trigger using the Lambda console, the console modifies your function's resource-based policy to allow Amazon S3 to invoke the function.

9. Choose Create function.

Review the function code

The Lambda function retrieves the source S3 bucket name and the key name of the uploaded object from the event parameter that it receives. The function uses the Amazon S3 getObject API to retrieve the content type of the object.

While viewing your function in the Lambda console , you can review the function code on the Code tab, under Code source. The code looks like the following:

Test in the console

Invoke the Lambda function manually using sample Amazon S3 event data.

To test the Lambda function using the console

1. On the Code tab, under Code source, choose the arrow next to Test, and then choose Configure test events from the dropdown list.

2. In the Configure test event window, do the following:

   1. Choose Create new test event.

   2. For Event template, choose Amazon S3 Put [s3-put].

   3. For Event name, enter a name for the test event. For example, mys3testevent.

   4. In the test event JSON, replace the S3 bucket name [example-bucket] and object key [test/key] with your bucket name and test file name. Your test event should look similar to the following:

      {
        "Records": [
          {
            "eventVersion": "2.0",
            "eventSource": "aws:s3",
            "awsRegion": "us-west-2",
            "eventTime": "1970-01-01T00:00:00.000Z",
            "eventName": "ObjectCreated:Put",
            "userIdentity": {
              "principalId": "EXAMPLE"
            },
            "requestParameters": {
              "sourceIPAddress": "127.0.0.1"
            },
            "responseElements": {
              "x-amz-request-id": "EXAMPLE123456789",
              "x-amz-id-2": "EXAMPLE123/5678abcdefghijklambdaisawesome/mnopqrstuvwxyzABCDEFGH"
            },
            "s3": {
              "s3SchemaVersion": "1.0",
              "configurationId": "testConfigRule",
              "bucket": {
                "name": "my-s3-bucket",
                "ownerIdentity": {
                  "principalId": "EXAMPLE"
                },
                "arn": "arn:aws:s3:::example-bucket"
              },
              "object": {
                "key": "HappyFace.jpg",
                "size": 1024,
                "eTag": "0123456789abcdef0123456789abcdef",
                "sequencer": "0A1B2C3D4E5F678901"
              }
            }
          }
        ]
      }

   5. Choose Create.

3. To invoke the function with your test event, under Code source, choose Test.

   The Execution results tab displays the response, function logs, and request ID, similar to the following:

   Response
   "image/jpeg"
   
   Function Logs
   START RequestId: 12b3cae7-5f4e-415e-93e6-416b8f8b66e6 Version: $LATEST
   2021-02-18T21:40:59.280Z	12b3cae7-5f4e-415e-93e6-416b8f8b66e6	INFO	INPUT BUCKET AND KEY:  { Bucket: 'my-s3-bucket', Key: 'HappyFace.jpg' }
   2021-02-18T21:41:00.215Z	12b3cae7-5f4e-415e-93e6-416b8f8b66e6	INFO	CONTENT TYPE: image/jpeg
   END RequestId: 12b3cae7-5f4e-415e-93e6-416b8f8b66e6
   REPORT RequestId: 12b3cae7-5f4e-415e-93e6-416b8f8b66e6	Duration: 976.25 ms	Billed Duration: 977 ms	Memory Size: 128 MB	Max Memory Used: 90 MB	Init Duration: 430.47 ms        
   
   Request ID
   12b3cae7-5f4e-415e-93e6-416b8f8b66e6

Test with the S3 trigger

Invoke your function when you upload a file to the Amazon S3 source bucket.

To test the Lambda function using the S3 trigger

1. On the Buckets page of the Amazon S3 console, choose the name of the source bucket that you created earlier.

2. On the Upload page, upload a few .jpg or .png image files to the bucket.

3. Open the Functions page of the Lambda console.

4. Choose the name of your function [my-s3-function].

5. To verify that the function ran once for each file that you uploaded, choose the Monitor tab. This page shows graphs for the metrics that Lambda sends to CloudWatch. The count in the Invocations graph should match the number of files that you uploaded to the Amazon S3 bucket.

   For more information on these graphs, see Monitoring functions on the Lambda console.

6. [Optional] To view the logs in the CloudWatch console, choose View logs in CloudWatch. Choose a log stream to view the logs output for one of the function invocations.

Clean up your resources

You can now delete the resources that you created for this tutorial, unless you want to retain them. By deleting AWS resources that you're no longer using, you prevent unnecessary charges to your AWS account.

To delete the Lambda function

1. Open the Functions page of the Lambda console.

2. Select the function that you created.

3. Choose Actions, then choose Delete.

4. Choose Delete.

To delete the IAM policy

1. Open the Policies page of the AWS Identity and Access Management [IAM] console.

2. Select the policy that Lambda created for you. The policy name begins with AWSLambdaS3ExecutionRole-.

3. Choose Policy actions, Delete.

4. Choose Delete.

To delete the execution role

1. Open the Roles page of the IAM console.

2. Select the execution role that you created.

3. Choose Delete role.

4. Choose Yes, delete.

To delete the S3 bucket

1. Open the Amazon S3 console.

2. Select the bucket you created.

3. Choose Delete.

4. Enter the name of the bucket in the text box.

5. Choose Confirm.

Next steps

Try the more advanced tutorial. In this tutorial, the S3 trigger invokes a function to create a thumbnail image for each image file that is uploaded to your S3 bucket. This tutorial requires a moderate level of AWS and Lambda domain knowledge. You use the AWS Command Line Interface [AWS CLI] to create resources, and you create a .zip file archive deployment package for your function and its dependencies.