Viewsonic vx3211 4k mhd 32 review năm 2024

In this review, we’re taking a look at ViewSonic’s VX3211-4K-mhd entertainment monitor. As you can probably guess by its name, it offers a 4K display. Aimed for those who wish to take their videos to the next level, let’s see what the monitor is actually all about, shall we?

Unboxing

With the ViewSonic VX3211-4K MHD, you’ll be treated with a fairly large box, seeing that it is a 32-inch monitor after all.

First and foremost is the display itself, which is packed and guarded by Styrofoam in the box. Surprisingly the monitor isn’t that heavy despite its size.

There’s the power cable provided as well to power up the monitor. It’s worth noting that we’re not the first to receive the package of this ViewSonic VX3211-4K MHD unit so you’ll find it a bit different to what’s offered at stores. Rest assured, you’ll be getting a HDMI cable and also a manual for you to get started.

Appearance

In terms of look, the ViewSonic VX3211-4K MHD looks like your standard monitor. If you’re looking for an extravagant one with RGBs, well you’re not getting that here. One thing that I like about it is that the stand is completely flat and can be easily placed in any surface. The bezels are not too big, not too small.

Switching over to the back, you’ll notice that the monitor supports VESA, so there’s that flexibility for placement. The stand is connected to the display down the middle and you’ll find the menu buttons on the bottom left side to adjust the display. Though it’s not visible, there’s 2.5W dual speakers fitted inside of the monitor, with both placed near the middle of the back. If you’re wondering what the hole on the right is, well coming in as a surprise, it is actually a screw hold for a headphone stand. Unfortunately, we didn’t receive the screw itself to show how it’d look like. Let’s just move forward, right?

Taking a closer look to the right compartment (from the back), there 2 HDMI ports that’s accompanied with a DisplayPort and also a 3.5mm port.

Over the left side is where you’ll find where the power the monitor itself.

Specification

Panel Size 32-inch (31.5-inch) Color Saturation 97% (DCI-P3), 99% (Adobe RGB) Panel Backlight / Type VA True Resolution 3840×2160 Display Viewing Area(HxV) 698.4mm x 392.85mm Display Surface Non-glare Pixel Pitch 0.155 mm Brightness 300 cd/㎡ (Typical) Contrast Ratio 3000 :1 (Typical) Viewing Angle (CR≧10) 178°(H)/178°(V) Response Time 4ms (Gray to Gray) Display Colors 1.07b (8 bit+Hi-FRC) HDR (High Dynamic Range) Support Yes (HDR10) Refresh Rate(max) 60Hz Low Blue Light Yes HDCP support Yes Viewing modes Standard, Game, Movie, Web, Text, MAC, Mono Adaptive refresh rate Yes (FreeSync) Signal Input HDMI(v2.0), DisplayPort 1.2 Earphone jack 3.5mm Mini-Jack Power Consumption 46W (full brightness) Chassis Colors Black Tilt +13°~-5° VESA Wall Mounting 100x100mm Weight 6.6kg(Net), 10.06kg (gross) Compliance & Standards BSMI, RCM, GEMS, MEPS, PSE, VCCI, KC, e-Standby

Performance

For our monitor reviews, we decided to do benchmarks with DisplayCAL, which gives a rough idea of how well the display performs. Without talking to much, let’s head straight into it.

Measured whitepoint 6.46 Not OK Measured display profile whitepoint 7.76 Average ΔE*00 2.87 Not OK Maximum ΔE*00 6.15 Not OK

So we ran the measurement test on the benchmark (on 100% brightness) and we could see that the scores aren’t really that good. To get the best possible scores, it’s recommended to get a score less than 1 for whitepoints and the average ΔE*00. As for the maximum ΔE*00, it’s best to score less than 3.

Measured whitepoint 0.48 OK Measured display profile whitepoint 1.76 Average ΔE*00 0.94 OK Maximum ΔE*00 1.25 OK

This is how the scores look like once the monitor has been calibrated and optimized. It’s definitely an upgrade from the original ratings, with each category being near or lower the recommended mark.

Here’s the color gamut for the ViewSonic VX3211-4K MHD after calibration. In terms of coverage, it managed to cover 99.7% sRGB, 83.8% for Adobe RGB, and 89.4% DCI P3, which are decent scores.

For Gamut volume on the other hand, it covers 136.6% sRGB, 94.1% Adobe RGB and 96.8% DCI P3. As you can see, it falls just short of a perfect 100% score in the blue color area.

We also did a uniformity test to check out each part of the display on whether they are equally lit up. The test takes the middle of the screen’s brightness as a guide and compares to the rest to see how well they display. From the test, we see that it does a good job with both top and bottom edges of the display having nominal scores. When the monitor is seen with the naked eye, the test adds up as there’s no noticeable dim to be seen around the edges of the display.

As for power consumption, we tested the VX3211-4K MHD and found out that it uses 46W on full brightness. Considering the monitor’s size, it is quite decent of the amount of power that’s being used and it is actually below average for a 32-inch display.

User Experience

I was quite surprised when I took the monitor out of the box and to find out how light it is. It doesn’t weight too much, considering that it’s a 32-inch monitor.

In terms of viewing angles, it’s pretty much fine though I wished that ViewSonic gave the option to adjust the height of the monitor, which you can only tilt it. Ergonomically, it falls a bit short here.

The OSD (on-screen display) is rather small despite the monitor’s size but thankfully, you’ll be able to change it to a bigger frame from the settings (which I suggest you to do). As you can see, the monitor comes with seven preset of modes and you can adjust each to your liking. Just make sure that you don’t select “Memory Recall” as that will reset back every adjustment that you make.

Since it’s aimed for entertainment purposes, let’s talk about the audio. Even though it does have dual speakers built-in, you probably should spend some money on an external speaker. I wouldn’t say the sound quality is bad but you’d definitely would want more for the best entertainment experience possible.

At first, it was rather strange for me to face the monitor, seeing that I came from a small 24-inch display. I definitely needed some time to adjust myself to it but regardless, it was definitely a pleasure in watching movies and videos on the VX3211 thanks to its full 16:9 3840×2160 resolution display.

Now this monitor isn’t made for gaming but regardless we had a go with it. With the monitor, you’ll be getting AMD’s FreeSync technology. It does make games smoother but not to a great extent. Just remember to turn it on from the OSD as it is off by default. If you’re looking to play fast-paced games such as Rainbow Six Siege or the likes, you’re going to be at an disadvantage due to the lower refresh rate.

Conclusion

Sure, the ViewSonic VX3211-4K MHD has its flaws here and there but considering the price that it’s at, it is absolutely an attractive option. It is definitely one of the cheapest 32-inch 4K monitors out there at the price point of RM1,599. Thanks to the big size and display quality, we award the ViewSonic VX3211-4K MHD our very own Silver Pokdeward!

We would like to give a big shout out to ViewSonic Malaysia for providing us the ViewSonic VX3211-4K MHD that was used in this review.

Is the ViewSonic vx3211 4k

ViewSonic VX3211-4K-MHD is one of the most affordable 32-inch monitors on the market and happens to have a 4K Ultra HD display, rather than a 2K or FHD. It has great features like the AMD FreeSync, HDR10, 99% sRGB color coverage, a MEGA dynamic contrast ratio of 80M:1, 2 x HDMI 2.0 ports and a DisplayPort.

What kind of screen does the ViewSonic 4K Entertainment Monitor have?

The ViewSonic 4K Entertainment Monitor has a 32-inch Vertical Alignment (VA) TFT-LCD screen, with support for high dynamic range content up to the HDR10 format. The monitor has a peak brightness of 300nits, and a standard refresh rate of 60Hz.

Does ViewSonic support HDR?

Viewsonic has been aggressively releasing a number of monitors. And with HDR going mainstream, Viewsonic has released a number of monitors featuring support for the new HDR standard. With the advent of HDR TVs, Viewsonic has jumped on to the bandwagon and has updated some of their monitors to keep up with the HDR standard as we move forward.

What is the response time of a ViewSonic monitor?

Thanks to Numinous123 for discovering this, it’s listed as 4ms on several places online as 4ms, and Viewsonic EU’s site doesn’t list a value, Viewsonic’s MY (Malaysia) page lists it as “ Response Time: GTG (AVR; Scaler OD) *2:3ms (Typ)” which is non-standard formatting for this value. Remember back in the old days with CRT monitors?

What is the warranty on vx3211 4K MHD?

3-year Limited Warranty.

Does ViewSonic support 4K?

Designed with productivity in mind, the ViewSonic® VX4381-4K combines incredible 4K resolution, a sleek narrow-bezel design, and an expansive 43” (42.5" viewable) screen so you can see all and do all from a single monitor.