This is a step-by-step guide showing the users how to create their own battery. The E-book was created just to explain and help people out of the problem they face because of the lack of good battery. The guide was made to help the users use about 90% of the tools they have at home to create a battery for themselves and their family. It is a unique concept that can be used in every home. It was created in such a way that it would be a quick fix for their battery problem. In other words, when the users purchase it during the day, the users will be able to make use of it before night falls. The process is so easy that even a little child can fix it up. It will be their guide in building any type of battery- car battery, cell phone battery, laptop battery, drill battery, solar panel battery. The guide is such that comes at a cheap price and would help in the reduction of the amount the users might have to pay for a new battery due to the number of appliances the users will use in their house. Read more here...
Battery Reconditioning 4 You Review
I've really worked on the chapters in this ebook and can only say that if you put in the time you will never revert back to your old methods.
This book served its purpose to the maximum level. I am glad that I purchased it. If you are interested in this field, this is a must have.
Read full review...This eBook guide gives you all the information that you need to know to never have to buy batteries again. You will learn what it takes to recondition your batteries that you already have, with things that already have at your house or can easily get. You can save money by never having to buy batteries again But it gets better! You can make huge profits off of selling the batteries that you reconditioned at premium prices. You don't have to have any technical know-how to learn how to do this All it takes is the information in this book! No matter what kind of batteries they are Even if they are car batteries, normal AA batteries, or forklift batteries, you can recondition them like new and sell them at full price or reuse them for yourself! Read more here...
To check the battery pack, do the following From Software 2. In Power Meter, confirm that if the parameters shown in the screen for Current Power Source and Total Battery Power Remaining are correct. 2. Remove the battery pack and measure the voltage between battery terminals 1[+] and 6[ground]. See the following figure To check the battery charge operation, use a discharged battery pack or a battery pack that has less than 50 of the total power remaining when installed in the computer. If the battery status indicator does not light up, remove the battery pack and let it return to room temperature. Re-install the battery pack. If the charge indicator still does not light up, replace the battery pack. If the charge indicator still does not light up, replace the DC DC charger board.
The battery pack furnished with the computer requires reasonable care and handling to ensure efficient operation and maximum life. Periodically inspect the battery terminals and the batteries for evidence of corrosion and oxide build-up clean if necessary. To ensure that the battery pack endures a normal life cycle, always observe the following precautions when handling the battery pack Do not drop the battery pack or subject it to excessive shock and vibration. Do not expose the battery pack to direct sunlight, moisture, or chemical compounds. Do not disassemble the battery pack. Do not use the battery pack to power other devices. Never attempt to charge the battery pack in any way other than as described in this manual. Always charge the battery pack as soon as possible after a low battery indication.
When you are operating the computer on battery power and the charge remaining is down to between 10 and 20 , the battery-low indicator blinks and an audible alarm sounds. When this happens you should take the following actions to conserve battery power and reduce the possibility of data loss. Saving files Save all open files frequently while the computer is in a low-battery condition.
The computer generally will notify you when you are reaching a low battery The battery low warning is automatically disabled when the AC Adapter is installed on the notebook, regardless of the charge condition of the battery pack. If the AC adapter is not plugged in within three minutes of a detected battery low condition, the notebook enters Suspend mode [if low battery suspend is specified in setup]. When the notebook enters Suspend mode, it issues one beep, saves contents of RAM to disk and powers down the unit.
The Extensa Notebook is shipped with a single battery pack that is inserted from the front left side of the computer. A second battery pack [option] can be installed in the removable Floppy CD-ROM bay. Two switches that used to remove devices from the option bay are physically located on the bottom of the Notebook. The left-most switch controls removal of the Primary Battery Pack and the right-most switch controls removal of the device installed in the Floppy CD-ROM Secondary Battery bay. To remove or replace the battery pack, follow the steps below. 2. Turn the notebook over and press the battery release switch while pressing outwards on the primary battery pack. Remove the battery from the Notebook. 3. Insert a new or recharged battery pack into the battery compartment bay. Make sure that the contacts are facing up and to the rear of the compartment. recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. 4. If installing a secondary...
Before performing any of the assembly disassembly procedures, always disconnect the AC adapter from the notebook and remove the battery pack. The procedure for removing and replacing the battery pack is as follows 5. Insert the replacement battery with THIS SIDE UP label facing upwards until it snaps in place and then close the battery compartment door [reverse of Steps 2 and 3.
The Extensa Series Notebooks use the Duracell DR35 as the primary battery pack. Specifications for the Primary Battery Pack are provided in Table 4-4. Table 4-4 Primary Battery Pack Specifications Table 4-4 Primary Battery Pack Specifications 3 hours [with APM] Battery charge time
If the computer does not power up when the Power Switch is pressed ON, you most likely have a malfunction in the power subsystem [loss of power at the AC outlet, faulty AC adapter, discharged Battery Packs, or faulty Power Supply on the Main Board]. With a power problem, all LEDs are extinguished, the LCD screen is blank, the system does not respond when the suspend switch is pressed several times consecutively and no drive activity can be heard. The computer is unable to load software and displays no visible signs of activity. To fault isolate a power problem, check the following Check to see that the battery packs are installed correctly and that the battery charge indicators on the front of the battery packs indicate the batteries are charged [try using a new battery pack if batteries are discharged]. If the AC outlet voltage, AC adapter, and battery packs test normal but the computer will not power up, try disconnecting the display cable from the base [refer to Chapter 6 for...
Power source [battery pack and power adapter]. See Power System Check on page 71. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 71. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 71. See Check the Battery Pack on page 72. Battery pack Main board Remove battery pack and let it cool for 2 hours. Battery pack
Removing the Battery Pack on page 51. Removing the SD Dummy Card on page 51. Removing the Express Dummy Card on page 52. Removing the Lower Cover on page 53. Removing the Fan Module on page 60. Removing the CPU Heatsink Module on page 61. Removing the CPU on page 62. Removing the Middle Cover on page 64. Removing the Keyboard on page 65. Removing the LCD Module on page 66. Removing the LCD Bezel on page 82. Removing the Inverter Board on page 83. Removing the LCD with Brackets on page 84.
Power source [battery pack and power adapter]. See Power System Check on page 62. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 62 . Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 62. See Check the Power Adapter on page 63. Battery pack Main board Remove battery pack and let it cool for 2 hours. Battery pack Battery pack
BATTERY PACK LI+ 6CELL 2.0MAH SANYO BATTERY PACK LI+ 6CELL 2.0MAH SONY BATTERY PACK LI 6CELL 2.0MAH PANASONIC BATTERY PACK LI 6CELL 2.0MAH SIMPLO BATTERY PACK LI+ 8CELL 2.4MAH SANYO BATTERY PACK LI+ 8CELL 2.4MAH SONY BATTERY PACK LI+ 8CELL 2.4MAH PANASONIC BATTERY PACK LI+ 8CELL 2.4MAH SIMPLO
The quick menu shows the remaining battery life based on current usage. 2. You can also launch the Acer ePower Management application and refer to the Battery status panel located just below the power plans. 3. Click the Battery tab to view remaining battery life, battery status, and remaining battery life in standby and hibernate modes.
3 Insert the small flat-blade screwdriver or non-marring tool under the old battery and gently pry it up until it pops out of the socket. 4 Make sure that the positive [+] side of the new battery is facing up, then press the battery into the socket until it snaps into place.
Battery Charge Test NOTE For ASSY Function Test Procedure, please prepare the following items for system components test SIO PIO loopback, diskette, mouse [PS 2], CD-Disk [Test Program], battery pack, SYS_card [Card Bus]X2, AC-adapter, keyboard, external speaker and feather.
If the computer does not power up when the Power Switch is set to the ON position, you most likely have a malfunction in the power subsystem [loss of power at the AC Outlet, faulty AC Adapter, discharged Battery Packs, or faulty Power Supply Board]. With a power problem, all LEDs are extinguished, the LCD screen is blank, the system does not respond when the standby switch several times consecutively and no drive activity can be heard. The computer is unable to load software and displays no visible signs of activity. Check to see that the battery pack is installed correctly [try using a recharged battery pack if batteryis discharged]. If the AC outlet voltage, AC Adapter, and battery packs test normal but the computer will not power up, replace the Power Supply Board and or Battery Board as described in Section 6. Low battery - Use a fully charged battery.
Editing a power plan allows you to adjust system settings like LCD brightness and CPU speed. You can also turn on off system components to extend battery life. Battery status For real-time battery life estimates based on current usage, refer to the panel in the upper half of the window. Click the to view estimated battery life in sleep and hibernate modes.
Disconnect the power adapter and install the charged battery pack then check that power is supplied by the battery pack. If you suspect a power problem, see the appropriate power supply check in the following list Check the Power Adapter on page 82 Check the Battery Pack on page 83 4. If the operational charge does not work, see Check the Battery Pack on page 83. Check the Battery Pack To check the battery pack, do the following From Software 2. In Power Meter, confirm that if the parameters shown in the screen for Current Power Source and Total Battery Power Remaining are correct. 2. Remove the battery pack and measure the voltage between battery terminals 1[+] and 6[ground]. See the following figure To check the battery charge operation, use a discharged battery pack or a battery pack that has less than 50 of the total power remaining when installed in the computer. If the battery status indicator does not light up, remove the battery pack and let it...
See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. Remove the Battery Pack. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50.
Removing the Battery Pack on page 53. 'Removing the SD Dummy Card on page 54. 'Removing the Express Dummy Card on page 54. 'Removing the Lower Cover on page 55. 'Removing the DIMM on page 56. 'Removing the WLAN Board Module on page 57. 'Removing the Hard Disk Drive Module on page 58. 'Removing the Optical Drive Module on page 59. 'Removing the CPU Heatsink Module on page 62. 'Removing the CPU on page 63. 'Removing the Keyboard on page 64. 'Removing the Middle Cover on page 65. 'Removing the LCD Module on page 68. 'Separating the Upper Case from the Lower Case on page 70.
Battery-low 2 level [V] Battery-low 3 level [V] Closing the display cover When the computer is about to enter Hibernation mode [e.g., during a battery-low condition], but the Hibernation file is invalid or not present. Power-on, Standby, Battery Status, Media Access, Caps Lock and Num Lock
See Removing the Battery Pack on page 46. Battery Pack on page 46. Battery Pack on page 46. Removing the Battery Pack on page 46. Battery Pack on page 46. Removing the Battery Pack on page 46. Removing the SD Dummy Card on page 47. Removing the DIMM Module on page 48. Removing the Back Cover on page 49. Removing the Hard Disk Drive Module on page 50. Removing the WLAN Modules on page 53. Removing the Optical Drive Module on page 55. Removing the Middle Cover on page 58. Removing the Keyboard on page 60. Removing the LCD Module on page 61. 1. See Removing the Battery Pack on page 46. Removing the Battery Pack on page 46. 'Removing the SD Dummy Card on page 47. 'Removing the DIMM Module on page 48. 'Removing the Back Cover on page 49. 'Removing the Hard Disk Drive Module on page 50. 'Removing the WLAN Modules on page 53. 'Removing the Optical Drive Module on page 55. 'Removing the Middle Cover on page 58. 'Removing the Keyboard on page 60. 'Removing the LCD Module on page 61....
Removing the SD Dummy Card on page 44. Removing the Battery Pack on page 45. Removing the Back Cover on page 46. Removing the Hard Disk Drive Module on page 48. Removing the Wireless LAN Card on page 50. Removing the DIMM Module on page 51. Removing the Heatsink Module on page 52. Removing the CPU on page 54. Removing the Optical Drive Module on page 55. Removing the Middle Cover on page 58. Removing the Keyboard on page 60. Removing the LCD Module on page 61.
Battery Pack on page 44. Removing the Battery Pack on page 44. Battery Pack on page 44. Removing the Battery Pack on page 44. Removing the SD Dummy Card on page 45. Removing the DIMM Module on page 46. Removing the Back Cover on page 47. Removing the Hard Disk Drive Module on page 48. Removing the WLAN Modules on page 51. Removing the Optical Drive Module on page 53. Removing the Middle Cover on page 56. Removing the Keyboard on page 58. Removing the LCD Module on page 59. 1. See Removing the Battery Pack on page 44. 1. See Removing the Battery Pack on page 44. 'Removing the Battery Pack on page 44. 1. See Removing the Battery Pack on page 44. Battery Pack on page 44. 1. See Removing the Battery Pack on page 44. 1. See Removing the Battery Pack on page 44. 1. See Removing the Battery Pack on page 44. 1. See Removing the Battery Pack on page 44.
Power source [battery pack and power adapter]. See Power System Check. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check. See Check the Battery Pack. Battery pack System board
Power source [battery pack and power adapter]. See Power System Check on page 51. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 51 . Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 51. See Check the Power Adapter on page 52. Battery pack Main board Remove battery pack and let it cool for 2 hours. Battery pack
Removing the SD Dummy Card on page 44. Removing the Battery Pack on page 45. Removing the Back Cover on page 46. Removing the Hard Disk Drive Module on page 48. Removing the Wireless LAN Card on page 50. Removing the DIMM Module on page 51. Removing the Heatsink Module on page 52. Removing the CPU on page 54. Removing the Optical Drive Module on page 55. Removing the Middle Cover on page 58. Removing the Keyboard on page 60.
Turn off the computer disconnect the AC power adapter [if it is attached], and remove the battery pack and PCMCIA cards as described in Paragraphs 6.5.1 and 6.5.2. Also disconnect the MPB [Paragraph 6.5.3] if attached. 2. Using your thumbs, unlock the two battery locks at each side of the MPB [refer to Figure 6-26] pull the battery pack out of the MPB. 6. Remove the DC-In and Battery Charger Cable Connectors [CN 13 and CN10].
Removing the Battery Pack on page 49 Removing the Hinge Caps on page 56 Removing the Middle Cover on page 56 Removing the Keyboard on page 57 Removing the Cable Cover on page 57 Removing the LCD Module on page 58 Removing the CPU Heat Sink Plate on page 67 Removing the RTC Battery on page 67 Removing the Upper Case on page 69 Removing the Charger Plate on page 72 Removing the CPU Heat Sink on page 72 Removing the Modem Board on page 55 Removing the Audio Board on page 73 Removing the Main Board on page 74
Power source [battery pack and power adapter]. See Power System Check on page 81. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 81. Battery pack Power adapter Power source [battery pack and power adapter]. See Power System Check on page 81. See Check the Battery Pack on page 82. Battery pack System board Remove battery pack and let it cool for 2 hours. Battery pack
See Removing the Battery Pack on page 44. Removing the Battery Pack on page 44. Removing the Battery Pack on page 44. Removing the SD Dummy Card on page 45. Removing the DIMM Module on page 46. Removing the Back Cover on page 47. Removing the Hard Disk Drive Module on page 48. Removing the WLAN Modules on page 51. Removing the Optical Drive Module on page 53. Removing the Middle Cover on page 56. Removing the Keyboard on page 58. Removing the LCD Module on page 59. Removing the LCD Bezel on page 84. Battery Pack on page 44. 'Removing the Battery Pack on page 44.
The quick menu shows the remaining battery life based on current usage. 2. You can also launch the Acer ePower Management application and refer to the Battery status panel located just below the power plans. 3. Click the Battery tab to view remaining battery life, battery status, and remaining battery life in standby and hibernate modes.
See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50. 1. See Removing the Battery Pack on page 50.
Editing a power plan allows you to adjust system settings like LCD brightness and CPU speed. You can also turn on off system components to extend battery life. Battery status For real-time battery life estimates based on current usage, refer to the panel in the upper half of the window. Click the to view estimated battery life in sleep and hibernate modes. Battery Status
BATTERY LOW BATTERY LOW When the battery capacity is low and no adapter is plugged in, the system will generate the following battery low warning If the AC adapter does not plug in within 3 minutes and the Standby Hibernation upon Battery-low in BIOS SETUP is enabled, the system will enter Standby 0-Volt Hibernation Mode. The battery low warning will stop as soon as the AC adapter is plugged into the system.
6.5.1 Removing Replacing the Notebook Battery Pack The procedure for removing and replacing the battery pack[s] is as follows Power down the notebook, remove the battery packs, and disconnect the AC Adapter, if installed. Note When reinstalling the Primary Battery Board, use the battery pack as a guide to ensure that the connector slots properly align with the battery slots. 1. Remove the AC Adapter, Battery Pack, Hard Disk Drive and Floppy Disk Drive from the unit. 1. Remove the AC Adapter, Battery Pack, Hard Disk Drive and Floppy Disk Drive from the unit. [7] Remove Battery, HDD, and Floppy Drive and Top Case Assembly [ ] Remove Battery, HDD, and Floppy Drive and Top Case Assembly [ ] Remove the Main Board.
Removing the Battery Pack on page 51. Removing the Lower Cover on page 53. Removing the DIMM on page 54. Removing the WLAN Board Module on page 55. Removing the Hard Disk Drive Module on page 56. Removing the Optical Drive Module on page 57. Removing the CPU Heatsink Module on page 60. Removing the CPU on page 61. Removing the Keyboard on page 62. Removing the Middle Cover on page 63. Removing the LCD Module on page 64. Removing the LCD Bezel on page 82.
Remove the battery pack and diskette drive. 3. Disconnect the AC Adapter and install the charged battery pack then check that power is supplied by the battery pack. Checking the Battery Pack To check operational charging, use a discharged battery pack or a battery pack that has less than 50 of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator still does not turn on, replace the battery pack. If the charge indicator still does not turn on, replace the System board. Then reinstall the battery pack. If the reinstalled battery pack is not charged, go to the next section. Checking the Battery Pack Battery charging will not start until the Fuel-Gauge shows that less than 95 of the total power remains with this condition the battery pack can charge to 100 of its capacity. This protects the...
The Bluetooth mouse comes with two rechargeable AA batteries and a USB charging cable. To recharge the mouse, plug one end of the charging cable into the USB port of the notebook computer and the other end into the Bluetooth mouse. Under normal circumstances, it takes approximately five hours to fully charge the Bluetooth mouse. NOTE Do not use the USB charging cable with traditional non-rechargeable batteries It may result in equipment damage or other conditions hazardous to your health by using non-rechargeable batteries.
Removing the Battery Pack on page 44. 'Removing the Lower Cover on page 45. 'Removing the Lower Cover on page 45. 'Removing the Optical Drive Module on page 46. 'Removing the DIMM on page 46. 'Removing the Hard Disk Drive Module on page 47. 'Removing the SSD Module on page 48. 'Removing the RTC Battery on page 49. 'Removing the Keyboard on page 51. 'Removing the WLAN Board Module on page 52. 'Separating the Upper Case from the Lower Case on page 53. 'Removing the Battery Pack on page 44.
There are four pre-defined profiles - Entertainment, Presentation, Word Processing, and Battery Life. You can also define up to three of your own. Battery status For real-time battery life estimates based on current usage, referto the panel on the lower left-hand side of the window.
See Removing the Battery Pack on page 48. 1. Remove the Battery Pack. See Removing the Battery Pack on page 48. 1. See Removing the Battery Pack on page 48. 1. See Removing the Battery Pack on page 48. 1. Remove the Battery Pack. See Removing the Battery Pack on page 48.
More Products
| Military Battery Reconditioning |
| Recondition Battery Guide |