Hướng dẫn php language needs compilation - ngôn ngữ php cần biên dịch
Anisgazig tại Gmail Dot Com ¶ ¶ Show 11 thàng trước
$this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 270 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 271 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 272 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 273 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 274 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 275 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 276 classToán tử nullsafe được sử dụng tốt nhất khi NULL được coi là giá trị hợp lệ và có thể có cho một tài sản hoặc phương thức trả về. Để chỉ ra một lỗi, một ngoại lệ ném là thích hợp hơn. Aaron tại Thatone Dot Com ¶ 14 năm trước Pawel Dot Zimnowodzki tại Gmail Dot Com ¶ $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 279 4 tháng trước Ví dụ #13 Lỗi nghiêm trọng khi phương thức con bắt buộc tham số tùy chọn bắt buộc Cảnh báoError. Prior to PHP 8.0.0, this would generate a deprecation notice, and $this would be undefined. Ví dụ #2 Một số ví dụ về $ này là giả biến object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }0 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }2 Đầu ra của ví dụ trên trong Php 7: $this is defined (A) Deprecated: Non-static method A::foo() should not be called statically in %s on line 27 $this is not defined. Deprecated: Non-static method A::foo() should not be called statically in %s on line 20 $this is not defined. Deprecated: Non-static method B::bar() should not be called statically in %s on line 32 Deprecated: Non-static method A::foo() should not be called statically in %s on line 20 $this is not defined. Đầu ra của ví dụ trên trong Php 8: $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 27 newĐể tạo một thể hiện của một lớp, từ khóa object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3 phải được sử dụng. Một đối tượng sẽ luôn được tạo trừ khi đối tượng có một hàm tạo được xác định để ném một ngoại lệ về lỗi. Các lớp nên được xác định trước khi khởi tạo (và trong một số trường hợp, đây là một yêu cầu). Nếu một chuỗi chứa tên của một lớp được sử dụng với object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3, một thể hiện mới của lớp đó sẽ được tạo. Nếu lớp nằm trong không gian tên, tên đủ điều kiện của nó phải được sử dụng khi làm điều này.string containing the name of a class is used with object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3, a new instance of that class will be created. If the class is in a namespace, its fully qualified name must be used when doing this.
Ví dụ #3 Tạo một thể hiện object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }5 Kể từ Php 8.0.0, sử dụng object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3 với các biểu thức tùy ý được hỗ trợ. Điều này cho phép khởi tạo phức tạp hơn nếu biểu thức tạo ra một chuỗi. Các biểu thức phải được bọc trong ngoặc đơn.string. The expressions must be wrapped in parentheses. Ví dụ #4 Tạo một thể hiện bằng cách sử dụng biểu thức tùy ý Trong ví dụ đã cho, chúng tôi hiển thị nhiều ví dụ về các biểu thức tùy ý hợp lệ tạo ra một tên lớp. Điều này cho thấy một cuộc gọi đến một hàm, nối chuỗi và hằng số ____27. object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }8 object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }9 NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }0 Đầu ra của ví dụ trên trong Php 8: object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { } Để tạo một thể hiện của một lớp, từ khóa object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3 phải được sử dụng. Một đối tượng sẽ luôn được tạo trừ khi đối tượng có một hàm tạo được xác định để ném một ngoại lệ về lỗi. Các lớp nên được xác định trước khi khởi tạo (và trong một số trường hợp, đây là một yêu cầu). Nếu một chuỗi chứa tên của một lớp được sử dụng với object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3, một thể hiện mới của lớp đó sẽ được tạo. Nếu lớp nằm trong không gian tên, tên đủ điều kiện của nó phải được sử dụng khi làm điều này. Ghi chú: NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }3 NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }4 NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }5 Nếu không có đối số nào được chuyển cho hàm tạo của lớp, ngoặc đơn sau khi tên lớp có thể bị bỏ qua. NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" } Ví dụ #3 Tạo một thể hiện Kể từ Php 8.0.0, sử dụng NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }6 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }8 Nếu không có đối số nào được chuyển cho hàm tạo của lớp, ngoặc đơn sau khi tên lớp có thể bị bỏ qua. bool(true) bool(true) bool(true) Ví dụ #3 Tạo một thể hiện Kể từ Php 8.0.0, sử dụng NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" }9 Ví dụ #4 Tạo một thể hiện bằng cách sử dụng biểu thức tùy ý
Trong bối cảnh lớp, có thể tạo một đối tượng mới vào NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" } 1 và NULL NULL object(SimpleClass)#1 (1) { ["var"]=> string(30) "$assigned will have this value" } 2.Khi gán một thể hiện đã được tạo của một lớp cho một biến mới, biến mới sẽ truy cập cùng một thể hiện với đối tượng được gán. Hành vi này là như nhau khi chuyển các trường hợp cho một hàm. Một bản sao của một đối tượng đã được tạo có thể được tạo bằng cách nhân bản nó. Ví dụ #5 gán đối tượng bool(true) bool(true) bool(true)0 bool(true) bool(true) bool(true)1 bool(true) bool(true) bool(true)2 Nếu không có đối số nào được chuyển cho hàm tạo của lớp, ngoặc đơn sau khi tên lớp có thể bị bỏ qua. Ví dụ #3 Tạo một thể hiện Kể từ Php 8.0.0, sử dụng bool(true) bool(true) bool(true)3 bool(true) bool(true) bool(true)1 bool(true) bool(true) bool(true)5 Nếu không có đối số nào được chuyển cho hàm tạo của lớp, ngoặc đơn sau khi tên lớp có thể bị bỏ qua. extendsVí dụ #3 Tạo một thể hiện Kể từ Php 8.0.0, sử dụng object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3 với các biểu thức tùy ý được hỗ trợ. Điều này cho phép khởi tạo phức tạp hơn nếu biểu thức tạo ra một chuỗi. Các biểu thức phải được bọc trong ngoặc đơn.
Trong ví dụ đã cho, chúng tôi hiển thị nhiều ví dụ về các biểu thức tùy ý hợp lệ tạo ra một tên lớp. Điều này cho thấy một cuộc gọi đến một hàm, nối chuỗi và hằng số ____27. bool(true) bool(true) bool(true)7 Nếu không có đối số nào được chuyển cho hàm tạo của lớp, ngoặc đơn sau khi tên lớp có thể bị bỏ qua. Extending class a default value Ví dụ #3 Tạo một thể hiệnKể từ Php 8.0.0, sử dụng object(ClassA)#1 (0) { } object(ClassB)#1 (0) { } object(ClassC)#1 (0) { } object(ClassD)#1 (0) { }3 với các biểu thức tùy ý được hỗ trợ. Điều này cho phép khởi tạo phức tạp hơn nếu biểu thức tạo ra một chuỗi. Các biểu thức phải được bọc trong ngoặc đơn. bool(true) bool(true) bool(true)8 level error is generated. A signature is compatible if it respects the variance rules, makes a mandatory parameter optional, and if any new parameters are optional. This is known as the Liskov Substitution Principle, or LSP for short. The constructor, and bool(true) bool(true) bool(true)9 methods are exempt from these signature compatibility rules, and thus won't emit a fatal error in case of a signature mismatch. Ví dụ #4 Tạo một thể hiện bằng cách sử dụng biểu thức tùy ý Extending class a default value0 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 Extending class a default value2 Ví dụ trên sẽ xuất ra: Các ví dụ sau đây chứng minh rằng một phương thức con sẽ loại bỏ tham số hoặc làm cho một tham số tùy chọn bắt buộc, không tương thích với phương thức mẹ. Ví dụ #12 Lỗi gây tử vong khi phương pháp con xóa tham số Extending class a default value3 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 Extending class a default value5 Đầu ra của ví dụ trên trong Php 8 tương tự như: Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 13 Ví dụ #13 Lỗi nghiêm trọng khi phương thức con bắt buộc tham số tùy chọn bắt buộc Extending class a default value3 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 Extending class a default value8 Đầu ra của ví dụ trên trong Php 8 tương tự như: Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 13 Ví dụ #13 Lỗi nghiêm trọng khi phương thức con bắt buộc tham số tùy chọn bắt buộc Cảnh báoError if named arguments are used. Đổi tên tham số của một phương thức trong một lớp con không phải là sự không tương thích của chữ ký. Tuy nhiên, điều này không được khuyến khích vì nó sẽ dẫn đến một lỗi thời gian chạy nếu các đối số được đặt tên được sử dụng. Extending class a default value9 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 277 Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 131 Ví dụ #Lỗi 14 Khi sử dụng các đối số và tham số được đặt tên được đổi tên trong lớp con Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 14 ::classVí dụ trên sẽ xuất ra một cái gì đó tương tự như: Từ khóa Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 135 Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 136 Fatal error: Declaration of Extend::foo() must be compatible with Base::foo(int $a = 5) in /in/evtlq on line 137 Ví dụ trên sẽ xuất ra:
Ví dụ #16 Thiếu độ phân giải tên lớpget_class() on the object. Kể từ Php 8.0.0, hằng số Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 131 Ví dụ trên sẽ xuất ra: Ví dụ #17 Độ phân giải tên đối tượngPhương pháp và thuộc tính NULLSAFE Kể từ Php 8.0.0, các thuộc tính và phương thức cũng có thể được truy cập với toán tử "nullsafe" thay thế: Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 132. Toán tử nullsafe hoạt động giống như quyền truy cập thuộc tính hoặc phương thức như trên, ngoại trừ nếu đối tượng bị bỏ rơi là Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 133 thì Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 133 sẽ được trả về thay vì ném ngoại lệ. Nếu độ phân giải là một phần của chuỗi, phần còn lại của chuỗi bị bỏ qua.is_null() check first, but more compact. Hiệu ứng tương tự như gói mỗi truy cập trong kiểm tra is_null () trước tiên, nhưng nhỏ gọn hơn. Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 135
Độ phân giải tên lớp sử dụng Ví dụ #16 Thiếu độ phân giải tên lớp Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 136 Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 137 Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 138 Fatal error: Declaration of Extend::foo(int $a) must be compatible with Base::foo(int $a = 5) in /in/qJXVC on line 139 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 140 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 141 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 142 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 276 Kể từ Php 8.0.0, hằng số Ví dụ #17 Độ phân giải tên đối tượng Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 144 Phương pháp và thuộc tính NULLSAFE ¶ Kể từ Php 8.0.0, các thuộc tính và phương thức cũng có thể được truy cập với toán tử "nullsafe" thay thế: Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 145 Hiệu ứng tương tự như gói mỗi truy cập trong kiểm tra is_null () trước tiên, nhưng nhỏ gọn hơn. ¶ Ví dụ #18 Nhà điều hành Nullsafe
Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 146 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 147 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 148 Fatal error: Uncaught Error: Unknown named parameter $foo in /in/XaaeN:14 Stack trace: #0 {main} thrown in /in/XaaeN on line 149
If you want your file to be interpreted as php then your file must start and end with and ?> and everything outside of that is ignored by the php parser. 2Toán tử nullsafe được sử dụng tốt nhất khi NULL được coi là giá trị hợp lệ và có thể có cho một tài sản hoặc phương thức trả về. Để chỉ ra một lỗi, một ngoại lệ ném là thích hợp hơn. ¶ Aaron tại Thatone Dot Com ¶
14 năm trước ¶ Ví dụ #16 Thiếu độ phân giải tên lớp
If you want your file to be interpreted as php then your file must start and end with and ?> and everything outside of that is ignored by the php parser. 9 Kể từ Php 8.0.0, hằng số Ví dụ #17 Độ phân giải tên đối tượng $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2700 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2701 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2702 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2703 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 276 Phương pháp và thuộc tính NULLSAFE ¶ Aaron tại Thatone Dot Com ¶ $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2705 14 năm trước ¶ Pawel Dot Zimnowodzki tại Gmail Dot Com ¶ $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2706 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2707 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2708 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2709 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2710 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 276 4 tháng trước ¶ Ví dụ #17 Độ phân giải tên đối tượng $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2712 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2713 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2714 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2715 Phương pháp và thuộc tính NULLSAFE ¶ Ví dụ #16 Thiếu độ phân giải tên lớp $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2716 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2717 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2718 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2719 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2720 Phương pháp và thuộc tính NULLSAFE ¶ Kể từ Php 8.0.0, các thuộc tính và phương thức cũng có thể được truy cập với toán tử "nullsafe" thay thế: $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2721 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2722 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2723 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 276 Hiệu ứng tương tự như gói mỗi truy cập trong kiểm tra is_null () trước tiên, nhưng nhỏ gọn hơn. ¶ Ví dụ #18 Nhà điều hành Nullsafe $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2725 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2726 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2719 $this is defined (A) Fatal error: Uncaught Error: Non-static method A::foo() cannot be called statically in %s :27 Stack trace: #0 {main} thrown in %s on line 2728 |