What is the starting point called in a metes and bounds description?
|
Metes and bounds are the boundaries of a parcel of real estate that identified by its natural landmarks. Metes and Bounds landmarks are often used in a “legal description” of a land. Legal description is the geographical description of a land that identifies its precise location, and is kept with the deed of the land. In legal descriptions, metes
and bounds are considered as the most accurate description of a piece of land in some jurisdictions. A metes and bounds legal description starts from a point of beginning, then traces the outline of the property’s boundary lines until there is closure in the legal description. Natural monuments and artificial monuments can both be used as metes and bounds. For example, rivers, roads, trees, etc. [Last updated in August of 2020 by
the Wex Definitions Team] There are many types of property descriptions. They include properties defined within a recorded subdivision, Section, Town, and Range descriptions, parcels defined on a recorded parcel map, and one of the most common, a metes and bounds description. These descriptions legally define lands for identification, tax assessment, and conveyance. Metes and Bounds Legal DescriptionThe term “legal” is often included, as these descriptions are utilized for the legal transfer of lands on documents such as deeds, land grants, etc. State statutes grant the County Auditor or Tax Assessor the authority to transfer properties. The property must be defined by a legal description to recognize and convey the lands. The conveyance form (a deed or instrument containing the legal description) is then put to record at the County Recorder’s office so there is an official public record of the transfer and the description. The County Auditor or Tax Assessor will also rely on the description to evaluate the property for tax assessment. Metes and Bounds DefinitionA metes and bounds description can be lengthy, confusing, and daunting to a novice who may not know how to read and interpret its narrative. The description defines the lands from the point of beginning (a property corner) around the entirety of the parcel, typically in a clockwise fashion, back to the point of beginning. Each line or course is described by two components, the “metes” and the “bounds.”
Metes and Bounds ExampleAn example of a defined property line by metes and bounds would be “Thence North 89 degrees, 39 minutes, 47 seconds West, a distance of 147.33 feet (the metes), along the southerly line of property now or formerly owned by John Smith (the bounds).” The math, or the metes, contains three parts to define the line:
In the above example, the directional call is North/West. The angle is 89 degrees, 39 minutes, 47 seconds (also delineated as 89° 39’ 47”) and the distance is 147.33’ (or feet). When calculated, observed, and reconciled by the surveyor, the metes should form a mathematically closed figure. All state statutes for the practice of land surveying include precision requirements with very stringent tolerances for closure. The Importance of the Metes and Bounds Description ComponentsWhen reviewing and comparing metes and bounds descriptions, such as recorded descriptions, new descriptions based on a new survey, or descriptions for adjoining parcels, it is common to notice differences in the metes component of a defined property line. This is due to the survey upon which the description is based and represents the best professional opinion of an individual surveyor. Usually, the differences are minimal between surveyors. When differing opinions in the math occur, the “bounded by” component becomes an integral part of the description. Regardless of differences in the math, if the same recognized bounded by component is cited, it is understood that the lines are the same, unless the surveyor reports any gaps, gores, or overlaps in descriptions between adjoining properties. It is possible to define a property by just citing the bounds. Many past legal descriptions may have been presented in this fashion in the early formation of the country before surveyors or state statutes for surveys. A property could have been defined as being bounded on the north by the road that travels from Salem to Siler City, bounded on the east by the lands of Jones, bounded on the south by the low water mark of the Ohio River, and bounded on the west by the Smith Farm. This certainly opens the door for disputes among adjoining property owners. Likewise, a property can be defined by just identifying the metes, or math component, of each property line without stating what said lines are bounded by. When presented in this manner, it would not take into consideration the differing opinions of surveyors and could cause gaps or overlaps of adjoining properties when descriptions are reviewed and compared. A description that contains both the metes and the bounds presents the most objective way to define a land. The definition of the mathematically closed figure of the property by the metes component is revealed and contiguity is understood by stating the bounded by component. For more information on the components of the ALTA Survey, see our Handbook for Commercial Real Estate Due Diligence or contact us today. What is the metes in a metes and bounds description?Metes and Bounds Definition
Each line or course is described by two components, the “metes” and the “bounds.” The metes is the math of the described property lines that circumscribes the perimeter of the parcel. The bounds are cited to state what each line is bounded by.
What are the fixed reference points used in a metes and bounds description?A metes and bounds description must return to the POB in order to be valid. The term "metes" refers to distance and direction, and the term "bounds" refers to fixed reference points, or monuments and landmarks, which may be natural and artificial.
What is metes and bounds quizlet?Metes and Bounds. A method of land description which involves identifying distances and directions and makes use of both the physical boundaries and measurements of the land. Oldest method of developing legal descriptions.
How are a metes and bounds recorded?This course will be designated as either north or south, followed by the degrees south or north and the length of the course. A metes and bounds course may be written as “South 40° west 35 feet,” for example.
|
