Top listed plastic pipe manufacturing companies in malaysia năm 2024

In most of the times, PVC is the plastic of choice for sewer pipes and the transportation of non-potable water, while UPVC is used more widely for water pipes than PVC.

Aathaworld is a leading supplier of pipe and related equipment and accessories in Malaysia. Our principal’s factory is located at Klang Valley, with the year total production capacity of ten thousand tons. Our products supply range covers from factory high specification steel pipe, cooling tower steel pipe, aluminum ventilation pipe, polysynthetic fabric ventilation pipe, HDPE Spiral Pipe, HDPE Pipe, Ribflo HDPE Corrugated Subsoil Drainage Pipe, Tenaga Nasional Berhad (TNB) Red Pipe and Telecom Black Pipe for a wide range of application. Its usage includes chemical pipeline, sewage pipeline, water supply system pipeline, gas pipeline, flood and river management, stormwater management, ventilation & ducting system, hydroelectric pipe system, cable pipeline solution and many many more. As one of the top leading pipe manufacturers in Malaysia, certain of our pipe and fitting product has the certification of Standards and Industrial Research Institute of Malaysia (SIRIM) and Suruhanjaya Perkhidmatan Air Negara (SPAN). We can supply pipe ranges from 20mm to 630mm outer diameter (OD) suitable for potable water pipeline and irrigation that are widely recognized in terms of its quality and reliable performance.

HDPE

One of our common fabricated pipe products is the HDPE Spiral pipe. Because it has the SPAN and SIRIM approval, large diameter pipe ranging from 300mm to 3,000mm, Bauku technology from Germany that suitable for many infrastructure usages. The manufacture of pipe in Malaysia that works closely with us claims that its spiral pipe is particularly suitable for pipe jacking, sewerage pipeline, submarine pipeline, pipe sleeve, slurry pipeline and more. The joints of the HDPE Spiral Pipe are able to fabricate as a socket or spigot joints that allow it to equipped with rubber ring gasket for quick installation. The joints can be welded through thermal extrusion process for proof of leakage as well as a fabrication for us to eliminate infiltration and exfiltration issues. Our Malaysia HDPE pipe manufacturer is also able to supply spiral pipe that comes with different fabricated fittings, which includes reducers, elbows, tees, branches, flanges, and manholes. HDPE specialist has a majority of their customers formed up by Department of Irrigation and Drainage (DID), sewerage contractors, infrastructure contractors, state water-works authorities, infrastructure authorities, telecommunication service providers, housing developers, and hardware wholesale dealers. HDPE products are able to be exported to other Southeast Asia countries such as Singapore, Brunei, Myanmar, Cambodia, Philippines, Indonesia, Sri Lanka, China and more.

The spiral version of our HDPE Pipe is produced through a profile extrusion process where an extruded profile strip is spirally wounded over a mandrel. This would result in an overlapping of the edge that fused homogeneously together while it is in the hot plastic state in order to produce a smooth surface internally. HDPE manufacturer Malaysia can supply PE corrugated pipe used for sub-duct to optic-fiber cable, PE corrugated pipe that can be used as wire ducting and ordinary PE corrugated pipe. Telecommunication fiber-optic sub-duct that made by HDPE is getting more and more demand from the market due to its cost efficiency, availability and more. HDPE is a very durable, rust-resistant and cost-effective material for many industries which is why many important infrastructures such as water sewage and water supply are using it.

PVC

The PVC pipe is also known as polyvinyl chloride pipe is the common usage pipe for many residential area and light industries usages. PVC its specification is usually not as high grade as the HDPE pipe but its cost and longevity is the main selling point. PVC is always the more affordable pipe for residential usages such as condominium, normal landed house, and some low chemical usage factory. Its application can be found in many components such as roof vent pipe, water gutter connection, house water, and drainage system and etc. This product is commonly produced and supply to many hardware shops because many repairs or temporary pipe connection can use it without any problem. PVC can also maintain its strength and durability even under long exposure of sunlight and weather deterioration when its coated with a UV and weather protection layer. It is common for the protection layer to be grey color and non-coated usually is white color and of course, there is always an exceptional case. PVC fitting has many types to increase its flexibility such as elbow, end cap, equal elbow, equal tee, reducing tee, connector, joint and etc. It is always good to plan or design before start to the installation because PVC pipe is not designed to be good looking so hiding or reduce exposure is the best approach you can do. If possible hiring an installer specialist such as Aathaworld to do the job is better because design, installation, touch up and other finishing work will all be done.

Steel and Other Types of Pipes

Steel pipe is a more high profile transport pipe. It usage include chemical waste, gas, petroleum, power plant, the waste factory, underwater facility, and machine. Its product is usually customized for different usage and specification so that is applicable to the industries and fulfill the safety and efficiency needs. Steel pipe is a very high cost to be fabricated and install so initial planning, design, installation machine, maintenance schedule must be done correctly and with minimum error. Another commercial pipe is the ventilation piping which commonly made from the material of aluminum. The product is usually mentioned by the contractor as Aluminum Flexible Duct. It works similar to a pipe but with lighter weight and better for air flow. It has a low thermal conductivity and low resistance which increase the air flow and lower usage of energy required. It is commonly seen in a big building with centralizing cooling tower, big kitchen air extraction system and other factories cooling system. To understand more info on the installation of pipe you can always consult with pipe specialist such as Aathaworld to know more about the details and best method to approach your project.

Where to Get Pipe fabrication and Accessories in Malaysia

Aathaworld Sdn Bhd supply different types of environmentally friendly pipes such as High-density polyethylene (HDPE) pipe, PVC pipe, steel pipe, steel pipe with coating, related fitting and many more. All the pipe product is suitable for residential, industrial (factory) and commercial building, from industrial steel pipe to infrastructure HDPE pipe and also residential PVC pipe. Our pipe fabrication would also able to make to fulfill different country requirement such that Malaysia some of our product would be able to meet the requirements of the cable ducting pipe of telco, energy supply, and water supply & drainage from the government sector. All the pipe can be coat with extra protection and able to the customizable specifications such as colors, sizes, patterns and shapes to make sure you have a satisfying quality of pipe equipment or materials supply and install in Malaysia to fit your requirement.

As a pipe leading supplier in Malaysia, we are able to provide different specification of pipe for your project requirements in Penang, KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak of East Malaysia. Besides Malaysia, we are also able to be pipe manufacturer, pipe supplier, pipe contractor (installer) for other countries in Southeast Asia (SEA) such as Vietnam, Singapore, Cambodia, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.

Submit your pipe materials sourcing requirements either you are looking for a pipe specialist (contractor) or pipe supplier in Klang Valley, KL Kuala Lumpur, Selangor or other states in Malaysia. Purchase your pipe related products and accessories now for your project today, submit your inquiry to us today at [email protected] or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).

Who are the largest plastic pipe manufacturers?

JM Eagle. JM Eagle is the leading manufacturer of PVC and PE plastic pipe. With greater strength, capacity and geographic reach than ever before, our resources provide an unmatched capability for new products, new materials, new applications and new processes.

Which company is best for UPVC pipe?

The Leading 5 PVC Water Pipe Manufacturers In India.

Ori-Plast Limited..

Supreme Industries..

Finolex Industries..

Ashirvad Pipes..

Astral Pipes..

Supreme Industries..

Is JM Eagle a Chinese company?

JM Eagle is an American corporation and a manufacturer of plastic pipe.

What is the best material for water pipes in Malaysia?

Notable for their corrosion resistance, Stainless Steel have long been used in Plumbing, Potable and Waste Water Treatment. The Types 304 and 316 Stainless Steel are standard materials to manufacture Stainless Steel Pipe & Fittings.